Version 2.23
Jump to navigation
Jump to search
Version 2.22.1 RC
 |
Languages: |
This is a draft of release notes for a planned version of Heureka.
Summary
This release includes the addition of AMPL as a supported modeling language, further improvements to the optimization module in PlanWise, changes to sapling height calculations, and bug fixes - especially to the tactical TPG in PlanWise.
==New Features==
AMPL
AMPL has been added as a supported modeling language in Planwise. AMPL has been added primarily because of the long building times when using ZIMPL with some large optimization problems. In many user-cases it will be easier to switch modeling language rather than trying to optimize the formulation of the optimization problem itself. AMPL requires a user license. For non-commercial use and prototyping there is a AMPL Community Edition which comes with restrictions when it comes to using the commercial solvers.
Before using the AMPL modeling language in Heureka AMPL must be installed. The path to the exectutable is the entered into the settings in Heureka (figure 1). After setup a new AMPL model can be created by using the Model Wizard in Heureka (figure 2) or changing an existing model to use AMPL instead of ZIMPL (figure 3). If the modeling language is changed user-supplied definitions need to be changed if they fail validation (figure 4). The validation of the AMPL syntax is done by Heureka and has been tested for models generated in Heureka, but some valid AMPL syntax might fail Heureka's validation . If a valid AMPL model is marked as invalid in Heureka please let us know.
One difference between standard AMPL syntax and Heureka is that parameter and contraint declarations should be skipped since the names of a model's members is derived from the name they are assigned in Heureka. A parameter with the name p1 in Heureka and the definition MidPointUsed[0]; will be translated to param p1 := midpointused[0]; in the resulting AMPL model.
Figure 1. Before using AMPL the path to the executable need to be set.
Figure 2. Creating a new model using AMPL with the Wizard.
Figure 3. Changing the modeling language for selected model.
Figure 4. Model items which contain a user-supplied definition need to be changed by user.
Figure 5. In models generated by the Model Wizard the constraint declaration is shortened.
- Calculations of sapling growth now uses SIH instead of SIS. If SIH is not supplied Alex Mensah's conversion functions will be applied. In most cases this is expected to lead to increased growth for saplings.
Bug Fixes
- If the control table setting "Treat Retention Patches as Parent Gen. 1" is set to true dependent patches will get the same treatments as parent up until final felling.
- Fixed an issue where the tactical TPG failed to generate expected programs even though the strategic TPG could find programs with thinnings during the tactical horizon.
- Fixed an issue where an error would be displayed if project was missing a valid in-database.
- Changed stochastic mortality to be calculated per-stem instead of per type tree (which can represent multiple stems).
- Fixed an issue where stands with historic regeneration were reset when Treatment Proposals were present
- Fixed an issue were height settings for thinning were ignored in the tactical TPG.
- Changed how regeneration proposals are handled. Regeneration proposals no longer overwrite historic treatments. Instead a warning is submitted to the OutputWindow that a treatment proposal was ignored.
- Fixed an issue were the function 'Rerun simulation' failed due loading data from database.
- Fixed an issue were the Tactical TPG generated wrong treatments if several control categories were used
- Fixed an issue were loading and saving older optimization models failed due to a removed ResultProperty.
- Fixed an issue were wrong ThinningIntensity were stored in the datatable which lead to higher thinning intensity in some cases when using 'Rerun simulation'.
- Fixed a SQL Timeout when generating treelists for very large stand registers
- Changed how thinning intensity is handled in treatment proposals. The Thinning guide is now used if a user supplied value is missing in the treatment proposal.
Details from bugtracker
| Id | Category | Severity | Summary | Fixed_in_version | Resolution |
|---|---|---|---|---|---|
| 0000412 | General | block | Exception when running TPG from a projected start state | 2.17.2 | fixed |
| 0000390 | TPG | block | TPG Exception when using "Breeding" and Fertilization | 2.17.0 | fixed |
| 0000351 | TPG | block | Timeout expection and high memory consumption when running PlanWise TPG | 2.16.0 | fixed |
| 0000352 | TPG | block | TPG-exception Incorrect syntax near 'stringvalue' where stringvalue is a text string in a forest domain condition | 2.16.0 | fixed |
| 0000324 | Visualisation StandWise | block | StandWise renderer encounters an error when handling dead trees. | 2.15.3 | fixed |
| 0000185 | Growth / production | block | Program hangs when running simulation | 2.10.1 | fixed |
| 0000372 | General | block | Exception thrown when display names are used for columns without display name. | fixed | |
| 0000466 | General | block | Fel vid beräkning av ingående tillstånd med testversion 2.18 | fixed | |
| 0000009 | Growth / production | crash | Invalid height growth exception | 2.5.0 | fixed |
| 0000579 | Other | crash | Fel vid beräkning av klickar och avverkningskluster | 2.21.0 | fixed |
| 0000333 | Optimization | crash | Cloning a set or parameter crashes the program | 2.16.0 | fixed |
| 0000318 | TPG | crash | PlanWise crasches when running this FMPP-stand | 2.15.2 | fixed |
| 0000294 | Project handling | crash | Application crashes if an error is raised when importing data during project creation | 2.14.0 | fixed |
| 0000279 | TPG | crash | TPG-error for birch-stand: "Invalid sapling volume, must be >= 0" | 2.14.0 | fixed |
| 0000239 | TPG | crash | Fel i prislista med pristrend | 2.12.2 | fixed |
| 0000340 | Optimization | crash | ZIMPL crash on large optimizations | fixed | |
| 0000042 | General | crash | SlimDx: External component has thrown an exception | fixed | |
| 0000336 | Optimization | crash | PlanWise shuts down when trying to build optimization model that has an error | fixed | |
| 0000160 | Map | major | Exception when exporting result map | 2.9.3 | fixed |
| 0000153 | Optimization | major | Thousand symbol separator inserted and interpreted as decimal symbol in optimization model | 2.9.2 | fixed |
| 0000154 | Control categories | major | Tree retention dialog does not open | 2.9.2 | fixed |
| 0000151 | Optimization | major | Areal-parameter i optimeringsmodellen ska peka på AdjustedAreaFactor | 2.9.0 | fixed |
| 0000128 | Data import | major | "Description" errors when importing treatment proposals | 2.9.0 | fixed |
| 0000137 | Growth / production | major | BreedingLevel = None vid plantering trots aktivering av förädlat material | 2.9.0 | fixed |
| 0000120 | Map | major | Map crashes occasionally when changing projection | 2.9.0 | fixed |
| 0000136 | TPG | major | Fel efter tvingande gallring, | 2.8.1 | fixed |
| 0000124 | Map | major | OutOfMemory in Map View | 2.8.1 | fixed |
| 0000116 | TPG | major | Control category numbers change from one simulation to the next | 2.8.0 | fixed |
| 0000117 | Map | major | Result map not displayed after optimization | 2.8.0 | fixed |
| 0000096 | RegWise simulation | major | Exception when simulating AreaExtentForestFuelThinning = 100% | 2.7.0 | fixed |
| 0000097 | Optimization | major | Do not allow deletion of MaxNPV-default solution | 2.7.0 | fixed |
| 0000107 | TPG | major | Exception when running "Rerun simulation" | 2.7.0 | fixed |
| 0000108 | TPG | major | Result variable DgHarvest per species deselected | 2.7.0 | fixed |
| 0000113 | Map | major | Polygon becomes invalid after import | 2.7.0 | fixed |
| 0000104 | TPG | major | TPG Error for treatment unit 343024: Invalid growth of height value, must be >= 0 | 2.7.0 | fixed |
| 0000094 | TPG | major | Tactial TPG does not give expected treatment schedule | 2.6.1 | fixed |
| 0000060 | TPG | major | Treatment result indicates cleaning although no cleaning has been done | 2.6.0 | fixed |
| 0000052 | Map | major | Heureka thematic map | 2.6.0 | fixed |
| 0000053 | Map | major | When using map pan tool the theme layer is removed | 2.6.0 | fixed |
| 0000065 | Data import | major | No stand registers are listed in form Simulate Tree Lists | 2.6.0 | fixed |
| 0000072 | Data import | major | Decimal value accepted as VegetationTypeCode | 2.6.0 | fixed |
| 0000084 | Map | major | Result map zooms out when changing period | 2.6.0 | fixed |
| 0000075 | Growth / production | major | Harvest residues extracted in RegWise altough allowed area is zero | 2.6.0 | fixed |
| 0000041 | Report generator | major | Fel i beräkning av medelvärde | 2.5.2 | fixed |
| 0000044 | Data import | major | Creation of many TreatmentUnits skipped when importing stand register | 2.5.2 | fixed |
| 0000055 | Data import | major | Expception when removing a treatment proposal row | 2.5.2 | fixed |
| 0000029 | TPG | major | Slutavverkning år 50 trots att åtgärdsförslaget anger år 45 | 2.5.1 | fixed |
| 0000018 | TPG | major | Treatment proposals for fertilization not scheduled as defined | 2.5.1 | fixed |
| 0000016 | TPG | major | TPG smulates 35 periods under certain conditions when treatment proposal is applied | 2.5.0 | fixed |
| 0000010 | General | major | Lärk ej valbart i röjnings- och gallringsinställningar | 2.5.0 | fixed |
| 0000013 | Growth / production | major | Wrong PlotType | 2.5.0 | fixed |
| 0000014 | General | major | Error when calculating initial state | 2.5.0 | fixed |
| 0000002 | Growth / production | major | Negative soil carbon stock in period 0 | 2.3.1 | fixed |
| 0000773 | Growth / production | major | Multiplication error in Elfving pine growth model | 2.23.1 | fixed |
| 0000745 | General | major | Memory leak: Memory is not freed as expected when using NC-areas | 2.23.1 | fixed |
| 0000759 | Climate model | major | Climate model underestimate growth | 2.23.1 | fixed |
| 0000490 | TPG | major | TPG Final Felling periods Min and Max are calculated in the wrong way | 2.23.1 | fixed |
| 0000703 | TPG | major | Planting is delayed in tactical TPG | 2.23.1 | fixed |
| 0000726 | Data import | major | Correction factors are not calculated for all treatment units | 2.23.0.2 | fixed |
| 0000720 | Data import | major | Correction factors not calculated for all area levels | 2.23.0.1 | fixed |
| 0000699 | TPG | major | Dependent retention patches do not have the same treatment as parent areas | 2.23.0 | fixed |
| 0000666 | TPG | major | Sometimes the tactical TPG fails to generate expected programs | 2.23.0 | fixed |
| 0000704 | TPG | major | Wrong species selected as regeneration species | 2.23.0 | fixed |
| 0000610 | General | major | Wrong coefficients are used when calculating the tapering of trees. | 2.22.0 | fixed |
| 0000603 | Growth / production | major | Stand age increases with 10 years when doing projection for 2 months | 2.22.0 | fixed |
| 0000612 | Growth / production | major | Incorrect relative age | 2.22.0 | fixed |
| 0000642 | General | major | Optimization results details display duplicate | 2.22.0 | fixed |
| 0000646 | TPG | major | Incorrect Control Category in TreatmentUnit during TPG | 2.22.0 | fixed |
| 0000628 | General | major | BiomassMortality contains PredictionUnitBiomass objects with wrong unit | 2.22.0 | fixed |
| 0000594 | TPG | major | Incorrect thinning intensity when doing "Rerun simulation" | 2.21.2 | fixed |
| 0000592 | Optimization | major | CBC solver status codes are handled incorrectly | 2.21.1 | fixed |
| 0000589 | TPG | major | TPG not completing when using treatment proposals | 2.21.1 | fixed |
| 0000573 | General | major | Mortality calculation sometimes biased towards too few or too many stems | 2.21.0 | fixed |
| 0000572 | TPG | major | Inget skötselprogram skapat | 2.21.0 | fixed |
| 0000550 | Growth / production | major | Avvikande ålder efter framskrivning | 2.19.1 | fixed |
| 0000541 | General | major | Wrong date format in SQL-query when making projection | 2.19.1 | fixed |
| 0000551 | TPG | major | Incorrectly calculated StemsCut | 2.19.1 | fixed |
| 0000543 | Data import | major | Heurekaberäknad volym oväntat låg, tappar 300 m3sk/ha | 2.19.1 | fixed |
| 0000508 | TPG | major | Creating dead wood from dead trees gives wrong results | 2.19.0 | fixed |
| 0000510 | Map | major | Map properties disappear when optimization is changed | 2.19.0 | fixed |
| 0000501 | Growth / production | major | Framskrivning av Ipak-data ger negativ tillväxt | 2.19.0 | fixed |
| 0000524 | General | major | Import Stand Register and Map unhandled exception | 2.19.0 | fixed |
| 0000488 | Other | major | Standwise NPV calculation fails | 2.18.3 | fixed |
| 0000497 | Report generator | major | Bugg when calculating "Biomass Total Extracted Above Ground" and "Biomass Total Extracted incl Stumps and Roots" | 2.18.3 | fixed |
| 0000485 | Data import | major | Inventory date in stand register file is ingored | 2.18.3 | fixed |
| 0000478 | General | major | Total Carbon stock and nitrogen not calculated on peat land | 2.18.2 | fixed |
| 0000481 | TPG | major | TPG fails when generating programs on set asides where parent had treatment proposals | 2.18.2 | fixed |
| 0000453 | Optimization | major | False message that feasible solution is not found when solving optimization problem with SCIP | 2.18.0 | fixed |
| 0000456 | Growth / production | major | Treatment unit volume is negative when there is also a layer of type 6 | 2.18.0 | fixed |
| 0000472 | Forest Domain Builder | major | Simulation crashes when a control category is dynamically assigned 0% of stands in period 0 | 2.18.0 | fixed |
| 0000457 | Data import | major | Linking stand register data to existing stands won't insert rows | 2.18.0 | fixed |
| 0000468 | Control categories | major | Importing a cost and revenue control table from PlanWise into StandWise removes all control tables | 2.18.0 | fixed |
| 0000451 | TPG | major | TPG generates invalid uneven-aged programs when fertilization policy is active for even-aged management | 2.18.0 | fixed |
| 0000471 | Forest Domain Builder | major | Error when using dynamically assigned control categories | 2.18.0 | fixed |
| 0000450 | TPG | major | Stand is thinned with StemDensityThinningGuide despite stem density is too low | 2.17.7 | fixed |
| 0000445 | Data import | major | FMPP inventory date is ignored | 2.17.6 | fixed |
| 0000433 | Control categories | major | Thinning restrictions are ignored when using StemDensityThinningGuide | 2.17.5 | fixed |
| 0000434 | General | major | ForestData.RegenerationSpecies is determined as spruce in a pine-dominated stand | 2.17.5 | fixed |
| 0000430 | General | major | Cost calculator plugins does not retain values from their PluginSettings properties | 2.17.4 | fixed |
| 0000427 | Other | major | Pricelist file handling does not work properly | 2.17.3 | fixed |
| 0000411 | Optimization | major | Optimization view map show the incorrect map | 2.17.2 | fixed |
| 0000382 | Growth / production | major | Heureka sets RegenerationSpecies = Pine for a contorta stand | 2.17.0 | fixed |
| 0000387 | General | major | habitatmodeller funkar inte (RegVis) | 2.17.0 | fixed |
| 0000374 | General | major | Last result variable selection is not loaded when opening a new simulation dialog | 2.16.4 | fixed |
| 0000377 | Project handling | major | Unable to open StandWise projects with a result database having a simulation with a planning horizon of 0. | 2.16.4 | fixed |
| 0000362 | RegWise simulation | major | No selection felling in NC areas | 2.16.1 | fixed |
| 0000342 | RegWise simulation | major | RegVis creates no NC-areas | 2.16.0 | fixed |
| 0000344 | TPG | major | Treatment proposal "Remove Overstorey" applied in wrong period and also removes saplings | 2.16.0 | fixed |
| 0000345 | TPG | major | TPG runtime exception after adding ProductionModel control table to a control category | 2.16.0 | fixed |
| 0000346 | TPG | major | Wrong breeding effect settings used after removing redundant control table | 2.16.0 | fixed |
| 0000329 | Data import | major | Bristfälligt felmeddelande vid import av denna registerfil | 2.16.0 | fixed |
| 0000328 | TPG | major | Period start instead of midpoint in som TPG-results | 2.15.4 | fixed |
| 0000322 | TPG | major | FMPP regeneration proposal ignored by TPG if "Apply Treatment Proposals" is checked | 2.15.3 | fixed |
| 0000323 | TPG | major | TPG-simulator does not save the best alternative | 2.15.3 | fixed |
| 0000315 | TPG | major | Exception when running TPG for FMPP treatment unit | 2.15.1 | fixed |
| 0000304 | Data import | major | Error when importing Forestand xml-file | 2.15.0 | fixed |
| 0000295 | Other | major | Column TreatmentUnit.AdjustedAreaFactor shows wrong value in InitialState.Details table when using NFI-data | 2.15.0 | fixed |
| 0000306 | TPG | major | No treatment program generated for a certain FMPP-stand when Conditional Control Tables is used | 2.15.0 | fixed |
| 0000298 | Forest Domain Builder | major | Forest Domain "Other" can be copied, which is not allowed | 2.15.0 | fixed |
| 0000308 | Data import | major | Cleaning and regeneration proposal for FMMP-stand is ignored | 2.15.0 | fixed |
| 0000299 | Forest Domain Builder | major | Different Forest Domains, Domain Settings and Control Categories can have the same name, which should not be allowed | 2.15.0 | fixed |
| 0000309 | Data import | major | Cannot enter species code for cleaning and planting treatment proposal | 2.15.0 | fixed |
| 0000310 | Growth / production | major | DominantSpecies is broadleaf altough spruce is expected | 2.15.0 | fixed |
| 0000311 | Control categories | major | Conditional control tables form looses data | 2.15.0 | fixed |
| 0000285 | Data import | major | Can not import comma separated tree lists | 2.14.0 | fixed |
| 0000288 | Data import | major | Error when importing FMPP test data set | 2.14.0 | fixed |
| 0000290 | Data import | major | Error when importing stand register with overstorey layer | 2.14.0 | fixed |
| 0000283 | TPG | major | Tactical TPG simulates planting in the wrong period | 2.14.0 | fixed |
| 0000250 | Data import | major | Simulated young stand completely different from input data | 2.13.0 | fixed |
| 0000260 | Data import | major | Young stand simulated when an established stand was expected (due to error in stand register record) | 2.13.0 | fixed |
| 0000255 | General | major | (RegWise) Alternative summary and Treatment Data results not display in results table view | 2.13.0 | fixed |
| 0000270 | Control categories | major | Control table parameters not displayed in Simple View | 2.13.0 | fixed |
| 0000256 | TPG | major | For some stands no tactical program are created if a strategic optimized plan is used as input | 2.13.0 | fixed |
| 0000271 | Other | major | Changed pulpwood max diameter is reset to default | 2.13.0 | fixed |
| 0000257 | TPG | major | Volume function for larch returns negative value for trees with large diameter or height. Solution: Use pine function if dbh >50 | 2.13.0 | fixed |
| 0000249 | RegWise simulation | major | Application crashes when loading prediction units with treatment history | 2.12.3 | fixed |
| 0000251 | Data import | major | Incorrect column mappings when importing Stand Registers | 2.12.3 | fixed |
| 0000242 | Optimization | major | Cannot compile model with an incorrect Area Type | 2.12.3 | fixed |
| 0000245 | Data import | major | Prompted for "Create NC-areas?" twice during same import | 2.12.3 | fixed |
| 0000238 | TPG | major | TPG Exception | 2.12.2 | fixed |
| 0000237 | Data import | major | Värden mappas till fel kolumner | 2.12.2 | fixed |
| 0000225 | TPG | major | Exception and suspected error in NPV-calculation in tactical TPG | 2.12.0 | fixed |
| 0000234 | RegWise simulation | major | Changing database will disable selection of inventory years | 2.12.0 | fixed |
| 0000217 | RegWise simulation | major | Even if all random seeds are set to fixed value, unexpected differences between simulation occur | 2.12.0 | fixed |
| 0000227 | TPG | major | No harvest revenues are reported if a schedule includes biofuel thinning | 2.12.0 | fixed |
| 0000218 | Project handling | major | Application throws error message when double clicking project from Windows Explorer | 2.12.0 | fixed |
| 0000211 | TPG | major | Youngs stands not thinned in first harvest period even if thinning criteria met | 2.11.1 | fixed |
| 0000205 | TPG | major | Initial state mean age for young plantation set to 0 after TPG | 2.11.0 | fixed |
| 0000195 | Growth / production | major | Inconsistent growth in StandWise | 2.11.0 | fixed |
| 0000187 | Other | major | Exception when splitting treatment units | 2.10.2 | fixed |
| 0000186 | Project handling | major | "CONCAT" error message when opening project | 2.10.1 | fixed |
| 0000167 | TPG | major | "Index was out of range" exception when applying treatment proposal in tactical TPG | 2.10.0 | fixed |
| 0000181 | TPG | major | Tree retention fails in selection felling | 2.10.0 | fixed |
| 0000166 | Data import | major | All previous treatment proposals are removed when importing a new treatment proposal file | 2.10.0 | fixed |
| 0000070 | Forest Domain Builder | major | Exception when adding TreeSizeDiversity in forest domain condition | fixed | |
| 0000193 | TPG | major | NPV different when rerunning simulation for stand where NC-areas have been created | fixed | |
| 0000017 | General | major | Error when upgrading database from version 1.9.8 | fixed | |
| 0000549 | Growth / production | major | Vid framskrivning till nytt startdatum omklassas fröträd till huvudskikt | fixed | |
| 0000030 | Data import | major | Calculated SIS mismatch | fixed | |
| 0000088 | RegWise simulation | major | Extreme amounts of soil carbon | fixed | |
| 0000489 | Growth / production | major | Sapling Damage Factors appears to have no effect in Generation 2 | fixed | |
| 0000194 | Growth / production | major | Invalid mortality | fixed | |
| 0000558 | Data import | major | Fel diameter vid import av Treelist | fixed | |
| 0000031 | Report generator | major | Different report results depending on filter type | fixed | |
| 0000118 | TPG | major | Simulation treatments are not saved for large simulations | fixed | |
| 0000001 | Growth / production | major | Backing to period 0 gives different biomass amount | fixed | |
| 0000356 | Report generator | major | Cannot create report conditions that include category variables | fixed | |
| 0000019 | General | major | Error when opening Map window in PlanWise when installed as MSI when unpacking DotSpatial extension | fixed | |
| 0000033 | General | major | Young stand error in StandWise - Forest.Stems reported as zero in period 0 desoite that there are trees | fixed | |
| 0000090 | Other | major | Refactorize NumEdit class | fixed | |
| 0000012 | Growth / production | major | Generation 1 and 2 different despite identical settings | fixed | |
| 0000587 | Data import | major | Heureka treelist import problem | fixed | |
| 0000081 | RegWise simulation | major | Intensive fertilization only applied every other rotation in RegWise | fixed | |
| 0000091 | Data import | major | Error when import XML-data | fixed | |
| 0000037 | Data import | major | Fel stamantal i ingående tillstånd för ungskogsbestånd | fixed | |
| 0000003 | General | major | Trädåldrar förändras efter treatmentUnit.Back(0) | fixed | |
| 0000045 | TPG | major | Too many periods | fixed | |
| 0000022 | Growth / production | major | Carbon result not updated in the first period after fertilization | fixed | |
| 0000469 | General | major | Different harvest cost i test version 2.18.0.4 of StandWise and PlanWise | fixed | |
| 0000038 | Map | major | Karta fortsätter visas trots att område är avmarkerat | fixed | |
| 0000302 | TPG | major | Stand register NCArea-values ignored when used with FMPP data | fixed | |
| 0000408 | TPG | major | Retention trees are felled immediately | fixed | |
| 0000158 | Map plugins | minor | Plugin for creating varying-width bufferzones based on water protection classification gives unexpected results | 2.9.3 | fixed |
| 0000159 | TPG | minor | NC-areas created during rerun of simulation do not get added to the optimization | 2.9.3 | fixed |
| 0000162 | TPG | minor | DeadWoodData initial distribution incorrectly calculated | 2.9.3 | fixed |
| 0000163 | Other | minor | Excel process remains running after program is closed | 2.9.3 | fixed |
| 0000149 | Map | minor | Common border length calculation incorrect when polygons touch in more than one sequence | 2.9.0 | fixed |
| 0000134 | TPG | minor | Lurig Regeneration Settings | 2.9.0 | fixed |
| 0000141 | General | minor | Cannot remove previous StandNeighbourhood results if too many rows are present | 2.9.0 | fixed |
| 0000142 | Forest Domain Builder | minor | Creating a forest domain from the selected stands adds it to the first domain template instead of the selected template | 2.9.0 | fixed |
| 0000152 | Growth / production | minor | Height growth reduction less than expected in pine plantation when enforcing high levels of moose damage | 2.9.0 | fixed |
| 0000143 | Forest Domain Builder | minor | Exception loading treatment units when creating a new forest domain | 2.9.0 | fixed |
| 0000130 | PlanEval | minor | Tabellvy för användargrupper trunkerad | 2.9.0 | fixed |
| 0000145 | Optimization | minor | Wrong help text when selecting TPG-simulation for optimization, and seemingly possible to select more than one simulation | 2.9.0 | fixed |
| 0000146 | Optimization | minor | StandNeighbour preview window doesn't update after calculation | 2.9.0 | fixed |
| 0000083 | Other | minor | Stratification routine hangs | 2.9.0 | fixed |
| 0000132 | Data import | minor | Treatment proposals can not be imported for treatment unit | 2.9.0 | fixed |
| 0000125 | Map | minor | Map reprojects twice when changing projection | 2.9.0 | fixed |
| 0000140 | Map | minor | Map export fails when some treatment units are excluded from simulation | 2.9.0 | fixed |
| 0000115 | Data import | minor | Importer stand register file name displayed instead of decription | 2.8.0 | fixed |
| 0000105 | Other | minor | The OK-button appears/disappears when changing the size of the Select Results dialog | 2.7.0 | fixed |
| 0000106 | Other | minor | Shallow copy of SpeciesCollection instead of deep clone | 2.7.0 | fixed |
| 0000110 | Map | minor | Fix field names when exporting map | 2.7.0 | fixed |
| 0000111 | Map | minor | Include projection when exporting map | 2.7.0 | fixed |
| 0000112 | Map plugins | minor | Webmap plugin not working | 2.7.0 | fixed |
| 0000102 | Other | minor | Remove common border length pairs | 2.7.0 | fixed |
| 0000101 | Other | minor | Database error when calculating common border length for very large dataset | 2.6.1 | fixed |
| 0000092 | Map | minor | Label transparency not working | 2.6.1 | fixed |
| 0000076 | Growth / production | minor | Usage of control table parameter AreaExtentStump is not implemented | 2.6.0 | fixed |
| 0000077 | Forest Domain Builder | minor | Treatment unit assigned to control category that have TargetArea = 0% | 2.6.0 | fixed |
| 0000071 | Data import | minor | Exception when calculating simulating trees when using Norwegian models | 2.6.0 | fixed |
| 0000078 | TPG | minor | No NC-set aside for EdgeZone stand that should be managed as independent stand | 2.6.0 | fixed |
| 0000079 | TPG | minor | No breeding effekt for initial regeneration | 2.6.0 | fixed |
| 0000066 | Growth / production | minor | Foliage should be subtracted from branch biomass in Marklund's biomass model | 2.6.0 | fixed |
| 0000057 | Map | minor | Map error when showing thematic map after changing projection | 2.6.0 | fixed |
| 0000068 | Forest Domain Builder | minor | RegWise crashes when deleting a cell value in kolumn TargetArea in Control Category Connections. | 2.6.0 | fixed |
| 0000058 | Map | minor | Map extent jumps sideways when changing map projection first time | 2.6.0 | fixed |
| 0000069 | General | minor | Application crashes when trying to add price trende for same treatment twice | 2.6.0 | fixed |
| 0000049 | Map | minor | Program should ask for projection when importing a forest map without projection file | 2.5.2 | fixed |
| 0000059 | Map plugins | minor | Exception when running BufferZones plugin | 2.5.2 | fixed |
| 0000050 | Map | minor | Selecting an area node with a different projection that the current map projection should raise question | 2.5.2 | fixed |
| 0000006 | General | minor | Exception when opening RegWise-project | 2.4.0 | fixed |
| 0000005 | General | minor | Selecting LocalDb as database server raises error Initial catalog value cannot be null | 2.3.1 | fixed |
| 0000731 | General | minor | Add help-link to Database help pages in create project | 2.23.1 | fixed |
| 0000706 | General | minor | Error thrown when displaying details from optimization result | 2.23.1 | fixed |
| 0000757 | General | minor | User Submitted Report | 2.23.1 | fixed |
| 0000722 | Report generator | minor | Change the default number of decimals shown in result tables to match the values provided in the data-classes | 2.23.1 | fixed |
| 0000764 | General | minor | Pricelist "Length Correction" does not accept negative values | 2.23.1 | fixed |
| 0000732 | Optimization | minor | No information given if AMPL exe is not selected | 2.23.1 | fixed |
| 0000747 | Optimization | minor | Binary variables not being reported correctly | 2.23.1 | fixed |
| 0000707 | General | minor | Failed to update net present value | 2.23.1 | fixed |
| 0000758 | General | minor | Issue with inconsistant initial state values for demo data | 2.23.1 | fixed |
| 0000723 | Report generator | minor | In the report results tab: add the option of opening in excel and exporting to .csv | 2.23.1 | fixed |
| 0000765 | General | minor | Implementation of new result variable "Species Richness" | 2.23.1 | fixed |
| 0000775 | General | minor | Wrong number of stems for trees logged to file | 2.23.1 | fixed |
| 0000733 | Data import | minor | Bad formatting of area levels in analyis area | 2.23.1 | fixed |
| 0000748 | General | minor | Add the option of selecting and removing multiple control categories | 2.23.1 | fixed |
| 0000714 | TPG | minor | Stand is regenerated even if treatment proposal for period 0 is "None" | 2.23.1 | fixed |
| 0000724 | Data import | minor | SimulateTreeDialog throws error if the length of Area description exceeds 50 characters | 2.23.1 | fixed |
| 0000766 | Growth / production | minor | Wrong harvested volume if high stumps are left | 2.23.1 | fixed |
| 0000778 | General | minor | UI bug in standwise 'Register Tree Data' tab for smaller screens | 2.23.1 | fixed |
| 0000735 | General | minor | Test database connection doesn't identify broken connections | 2.23.1 | fixed |
| 0000715 | TPG | minor | Treatments are not generated as expected if user has TP in period 0 | 2.23.1 | fixed |
| 0000779 | General | minor | Feature: Add generation as a possible result variable in optimization results | 2.23.1 | fixed |
| 0000736 | General | minor | Result databases with - in name can be created but results in an error when running TPG | 2.23.1 | fixed |
| 0000708 | General | minor | Pricelist calculation exception | 2.23.1 | fixed |
| 0000752 | General | minor | Add units to the pricelist | 2.23.1 | fixed |
| 0000786 | General | minor | User Submitted Report | 2.23.1 | fixed |
| 0000760 | Optimization | minor | Optimization Results Column Wise result view Produces SQL errors | 2.23.1 | fixed |
| 0000728 | General | minor | Add the option of creating sub-folders in the model explorer | 2.23.1 | fixed |
| 0000737 | General | minor | Simplify the process of removing stand registers and removing forests/analysis areas | 2.23.1 | fixed |
| 0000761 | General | minor | Forest Domain under Initial State > Details is displayed incorrectly for stands | 2.23.1 | fixed |
| 0000729 | General | minor | Change the order the results are printed out into the "Optimizaiton Results" output pane after a completed optimization | 2.23.1 | fixed |
| 0000738 | General | minor | Add a "Close All" button to the report results tab interface | 2.23.1 | fixed |
| 0000754 | General | minor | Problem with validation and testing server connection from SelectDbDialog | 2.23.1 | fixed |
| 0000771 | TPG | minor | Tactical TPG may use incorrect values from TreatmentModelControlTable mirrored from the TpgControlTable | 2.23.1 | fixed |
| 0000762 | Optimization | minor | Variable netRevenue created in model wizard has incorrect range | 2.23.1 | fixed |
| 0000730 | TPG | minor | Inconsistent NPV in the Tactical TPG | 2.23.1 | fixed |
| 0000746 | General | minor | Volume cut and extracted does not match if pricelist has negative values for pulp | 2.23.1 | fixed |
| 0000685 | TPG | minor | Very small differences in financial values between TPG and Rerun Simulation | 2.23.0 | fixed |
| 0000667 | TPG | minor | Tactical TPG uses enforced thinnings for second thinnings | 2.23.0 | fixed |
| 0000696 | TPG | minor | Management System not set to CheckerBoard in Alternative Summary | 2.23.0 | fixed |
| 0000686 | TPG | minor | Stands with historic regeneration are regenerated in period 0 | 2.23.0 | fixed |
| 0000668 | TPG | minor | Net Present Value is miscalculated if there is a thinning in the last period | 2.23.0 | fixed |
| 0000697 | Map plugins | minor | Feature: New map plugin Select Intersecting Polygons | 2.23.0 | fixed |
| 0000656 | General | minor | Occasionally news items will not load on the start page | 2.23.0 | fixed |
| 0000687 | TPG | minor | Stands with historic regeneration are reset when Treatment Proposals are present | 2.23.0 | fixed |
| 0000671 | TPG | minor | Spin-up for initial soil carbon use wrong species in some cases | 2.23.0 | fixed |
| 0000649 | TPG | minor | No unmanaged program in Tactical TPG | 2.23.0 | fixed |
| 0000688 | TPG | minor | Historic regenerations are ignored by treatmentproposals | 2.23.0 | fixed |
| 0000693 | TPG | minor | Very small differences in financial values between TPG and Rerun Simulation | 2.23.0 | fixed |
| 0000673 | TPG | minor | Stochastic mortality does not calculate mortality per stem | 2.23.0 | fixed |
| 0000677 | Optimization | minor | Loading and saving old models with removed ResultProperty fails | 2.23.0 | fixed |
| 0000662 | Project handling | minor | Error is thrown when displaying initial state if project has a missing in-database | 2.23.0 | fixed |
| 0000694 | TPG | minor | Treatment proposals: If Thinning intensity/grade is not set the default value of 0.35 is used | 2.23.0 | fixed |
| 0000652 | General | minor | "Copy table" does not copy the full table | 2.23.0 | fixed |
| 0000664 | TPG | minor | Height settings in Control table ignored in tactical TPG | 2.23.0 | fixed |
| 0000665 | TPG | minor | Tactial TPG generates treatments even though cc == unmanaged | 2.23.0 | fixed |
| 0000680 | TPG | minor | Rerun simulation fails to load alternatives | 2.23.0 | fixed |
| 0000682 | General | minor | Import error throws application error | 2.23.0 | fixed |
| 0000695 | TPG | minor | CAI Net differs from expected value in periods following treatments with harvest | 2.23.0 | fixed |
| 0000681 | General | minor | SQL Timeout when generating treelists for very large stand registers | 2.23.0 | fixed |
| 0000647 | Map | minor | Bug in Edit Blue Classes Def... in Buffer Tool | 2.22.0 | fixed |
| 0000639 | Growth / production | minor | In rare cases a Prediction Unit is not updated after trees are removed | 2.22.0 | fixed |
| 0000648 | Growth / production | minor | Dead Wood Decay class 4 retains dead wood under density threshold | 2.22.0 | fixed |
| 0000611 | RegWise simulation | minor | Storm mortality volume | 2.22.0 | fixed |
| 0000629 | Visualisation StandWise | minor | Unable to open 3D-view | 2.22.0 | fixed |
| 0000641 | TPG | minor | Treatment proposals with treatments within the same year does not work | 2.22.0 | fixed |
| 0000630 | General | minor | Restoring control table settings fails in StandWise | 2.22.0 | fixed |
| 0000604 | TPG | minor | Inget skötselprogram saknas för bestånd som är kalmark | 2.22.0 | fixed |
| 0000631 | Other | minor | Query error when viewing TreatmentUnit.ForestDomain in result viewer | 2.22.0 | fixed |
| 0000643 | Other | minor | Litter log not being written | 2.22.0 | fixed |
| 0000651 | TPG | minor | Duplicate programs when fertilizationless is enabled | 2.22.0 | fixed |
| 0000634 | General | minor | Error projecting a treatment unit to an earlier date | 2.22.0 | fixed |
| 0000644 | General | minor | Treatment.ThinningType is incorrectly calculated in StandWise | 2.22.0 | fixed |
| 0000616 | General | minor | Error in calculations of data per species | 2.22.0 | fixed |
| 0000635 | General | minor | Retained trees are lost when projecting an area to a future date | 2.22.0 | fixed |
| 0000597 | RegWise simulation | minor | Invalid basal area growth | 2.22.0 | fixed |
| 0000645 | RegWise simulation | minor | Some data missing in Monte Carlo simulations | 2.22.0 | fixed |
| 0000617 | General | minor | Problem with geometries in habitat tool (ring self-intersection) | 2.22.0 | fixed |
| 0000636 | Data import | minor | Project Wizard fails when importing stand register with errounous data | 2.22.0 | fixed |
| 0000601 | TPG | minor | Final felling applicability check in Treatment proposal manager is inconsistent with the TPG | 2.21.3 | fixed |
| 0000602 | General | minor | Crop Tree Probability assigned to wrong tree | 2.21.3 | fixed |
| 0000598 | General | minor | Excessive writing to simulation pane | 2.21.3 | fixed |
| 0000600 | TPG | minor | Invalid growth calculated when using breeding in very specific nature conservation configurations | 2.21.3 | fixed |
| 0000596 | General | minor | Incorrect seed when doing "Rerun simulation" | 2.21.2 | fixed |
| 0000570 | Data import | minor | Proportion of Userdefined species is altered in the import | 2.21.1 | fixed |
| 0000588 | TPG | minor | Incorrect order in white checkerboard programs | 2.21.1 | fixed |
| 0000565 | Optimization | minor | Selecting a parameter with a removed resultproperty throws exception | 2.21.0 | fixed |
| 0000583 | General | minor | Treatment proposals: TPG may switch over to control category 1 | 2.21.0 | fixed |
| 0000574 | Optimization | minor | Fel NPV i optimeringsinfo för alternativet MaxNPV | 2.21.0 | fixed |
| 0000584 | Growth / production | minor | Mindre fel i beräkning av SIS för tall på torvmark i norra Sverige | 2.21.0 | fixed |
| 0000567 | Optimization | minor | Small error in the Optimization wizard | 2.21.0 | fixed |
| 0000576 | General | minor | IPAK import: Dead trees assigned to wrong decay class | 2.21.0 | fixed |
| 0000585 | Data import | minor | Plots created in Register Tree Data does not get assigned distanceToCoast. | 2.21.0 | fixed |
| 0000560 | Control categories | minor | RotationAgeAdjustFactor is not considered when calculating initial state | 2.21.0 | fixed |
| 0000577 | Growth / production | minor | Breeding effect remains after resetting treatment unit in StandWise | 2.21.0 | fixed |
| 0000569 | Data import | minor | Treelist importer ignoring missing InventoryYear | 2.21.0 | fixed |
| 0000578 | Growth / production | minor | Overstorey Remover for initial regeneration is removed when backing to period 0 | 2.21.0 | fixed |
| 0000563 | General | minor | Simulation of treelist fails in Register Tree Data | 2.21.0 | fixed |
| 0000571 | Optimization | minor | Error when importing model item | 2.21.0 | fixed |
| 0000580 | General | minor | Negative Forwarder Cost | 2.21.0 | fixed |
| 0000564 | TPG | minor | Tactical TPG: Inconsistent behaviour in time between thinnings and other treatments | 2.21.0 | fixed |
| 0000581 | General | minor | Fuel wood not collected from natural mortality | 2.21.0 | fixed |
| 0000556 | Other | minor | NC Area splitter fails | 2.20.0 | fixed |
| 0000557 | Data import | minor | Error when typing too long 'Note' in Stand register importer | 2.20.0 | fixed |
| 0000554 | General | minor | Carbon from biomass is not using correct conversion factor | 2.20.0 | fixed |
| 0000555 | Data import | minor | Can't select any folders in tree list importer | 2.20.0 | fixed |
| 0000548 | General | minor | AlternativeSummary.ManagementSystem sometimes incorrect | 2.19.1 | fixed |
| 0000542 | General | minor | Issues with applying treatment proposals when projecting areas | 2.19.1 | fixed |
| 0000544 | General | minor | Result variable Harvested Wood Products - CO2 Emission should have unit "tonnes CO2/ha" | 2.19.1 | fixed |
| 0000526 | General | minor | Simulation report and optimization info fail to render | 2.19.0 | fixed |
| 0000509 | RegWise simulation | minor | Wind throw proportion, mortality volume and biomass incorrectly calculated | 2.19.0 | fixed |
| 0000518 | RegWise simulation | minor | Incorrect regeneration species in RegWise when regenerating due to land use change | 2.19.0 | fixed |
| 0000527 | General | minor | When opening a RegWise project with inventory years, the analysis area is not intact | 2.19.0 | fixed |
| 0000538 | RegWise simulation | minor | No treatments on NC units dependent on parents' treatments in checkerboard felling | 2.19.0 | fixed |
| 0000512 | General | minor | "Other area" is not reset when selection changes | 2.19.0 | fixed |
| 0000529 | TPG | minor | Spruce bark beetle index too high | 2.19.0 | fixed |
| 0000513 | Growth / production | minor | High sapling moose damage will sometimes cause the simulation to stall | 2.19.0 | fixed |
| 0000402 | General | minor | User Submitted Report - Incorrect Syntax | 2.19.0 | fixed |
| 0000530 | General | minor | Getting ValueData is slow | 2.19.0 | fixed |
| 0000502 | Optimization | minor | Simulation results are incorrectly sorted in RegWise table view | 2.19.0 | fixed |
| 0000533 | Data import | minor | Fel i framskrivning till nytt startdatum om bestånd har överståndare eller naturvårdsträd | 2.19.0 | fixed |
| 0000515 | RegWise simulation | minor | Volume from removal of overstorey is not included when calculating target final felling volume in RegWise | 2.19.0 | fixed |
| 0000493 | Optimization | minor | User submitted report - No feasible solution with LPSolve | 2.19.0 | fixed |
| 0000534 | Visualisation StandWise | minor | Error thrown on screenshot | 2.19.0 | fixed |
| 0000504 | Data import | minor | Areas projected to a future date are lacking some data fields present in the original data | 2.19.0 | fixed |
| 0000516 | General | minor | Soil carbon stock | 2.19.0 | fixed |
| 0000525 | RegWise simulation | minor | Stocastic sapling damage incorrectly calculated? | 2.19.0 | fixed |
| 0000535 | General | minor | Total CO2 from HarvestedWoodProducts is wrong | 2.19.0 | fixed |
| 0000486 | Map | minor | Risk för namnkonflikter när man exporterar kartor | 2.18.3 | fixed |
| 0000482 | Data import | minor | Inforuta polygonareal vid import av åtgärdsförslag | 2.18.3 | fixed |
| 0000491 | Forest Domain Builder | minor | Incorrect property selected in forest domain condition builder | 2.18.3 | fixed |
| 0000483 | Optimization | minor | Import of external optimization results treats csv:s with comma as decimal sign wrong | 2.18.3 | fixed |
| 0000494 | Report generator | minor | Failure to group optimization results correctly | 2.18.3 | fixed |
| 0000479 | RegWise simulation | minor | Sapling damage from initial regeneration causes unexpected behaviour | 2.18.2 | fixed |
| 0000480 | TPG | minor | Error generating tactical treatment programs after initial regeneration | 2.18.2 | fixed |
| 0000484 | Growth / production | minor | Negative Gross growth | 2.18.2 | fixed |
| 0000473 | Other | minor | Error when opening a project and attempting to update result database | 2.18.1 | fixed |
| 0000474 | Other | minor | Can not use "Report issue" when an exception occurs. 404 error | 2.18.1 | fixed |
| 0000475 | General | minor | Incorrect coefficient for Spruce Bark Beetle damage risk | 2.18.1 | fixed |
| 0000476 | General | minor | Even-Aged class in Structural Diversity is never calculated to EvenAged for established stands, only MostlyEvenAged | 2.18.1 | fixed |
| 0000461 | General | minor | Index out of range with additional decomposition in tactical | 2.18.0 | fixed |
| 0000462 | TPG | minor | Seed trees removed too early in tactical TPG | 2.18.0 | fixed |
| 0000454 | Optimization | minor | Malloc error when building optimization models with cliques and clusters | 2.18.0 | fixed |
| 0000465 | Map | minor | Result map show wrong stand age in TreatmentUnitInfo window for tactical TPG result | 2.18.0 | fixed |
| 0000455 | Optimization | minor | Cannot open "Import Optimization" interface | 2.18.0 | fixed |
| 0000467 | Report generator | minor | Varningsruta för "efter-värden i rapportbyggaren" | 2.18.0 | fixed |
| 0000458 | RegWise simulation | minor | No fertilizations performed despite control table settings | 2.18.0 | fixed |
| 0000459 | General | minor | Mean Volume Productive Area incorrectly calculated in initial state | 2.18.0 | fixed |
| 0000460 | TPG | minor | Tactical TPG generates empty programs with incorrect period lengths | 2.18.0 | fixed |
| 0000452 | TPG | minor | Biofuel extraction in CCF management is not vorking properly | 2.18.0 | fixed |
| 0000438 | Visualisation StandWise | minor | CPU always high in StandWise | 2.17.6 | fixed |
| 0000446 | Data import | minor | Irrelevant data checks when importing stand register just for linking to existing area | 2.17.6 | fixed |
| 0000439 | General | minor | "Vary thinning intensity" is always used, even when the setting is turned off | 2.17.6 | fixed |
| 0000447 | Growth / production | minor | Incorrect height growth calculated by Nyströms sapling height growth model | 2.17.6 | fixed |
| 0000440 | General | minor | Program crashes when copying data from optimization results in column view | 2.17.6 | fixed |
| 0000441 | Data import | minor | Error when importing stand register with apostrophes in the path | 2.17.6 | fixed |
| 0000442 | Optimization | minor | Can not build optimization models with formulas referencing constant value parameters | 2.17.6 | fixed |
| 0000435 | General | minor | Sometimes no results for ForwarderCost and HarvesterCost | 2.17.5 | fixed |
| 0000431 | TPG | minor | Incorrect stems after cleaning when using Treatment Proposals | 2.17.4 | fixed |
| 0000432 | General | minor | The previously selected treatment unit is not selected again when a project is opened in StandWise | 2.17.4 | fixed |
| 0000421 | Project handling | minor | Height range for cleaning not loaded properly from saved projects | 2.17.3 | fixed |
| 0000422 | Map | minor | Some result variables missing when exporting map data in optimization view | 2.17.3 | fixed |
| 0000423 | General | minor | No net present value for some treatment programs | 2.17.3 | fixed |
| 0000426 | Other | minor | Added pricelist is overwritten | 2.17.3 | fixed |
| 0000418 | General | minor | Null reference exception when simulation stands | 2.17.3 | fixed |
| 0000419 | Visualisation StandWise | minor | I visualiseringen visas avverkade träd som torrträd. | 2.17.3 | fixed |
| 0000398 | General | minor | Exception when using "Project to new start date" | 2.17.2 | fixed |
| 0000415 | Data import | minor | Error projecting area after importing from Tree List importer | 2.17.2 | fixed |
| 0000416 | Data import | minor | Exception when projecting area with stand register column aliases | 2.17.2 | fixed |
| 0000403 | General | minor | User Submitted Report - Stand Neighbourhood | 2.17.2 | fixed |
| 0000405 | General | minor | Null reference exception when building optimization model | 2.17.2 | fixed |
| 0000399 | Other | minor | Exported CSV files from result view have misaligned columns | 2.17.1 | fixed |
| 0000397 | Growth / production | minor | Breeding effect not considered when creating start state at 2 m height | 2.17.0 | fixed |
| 0000381 | Visualisation StandWise | minor | StandWise geometri i 3D | 2.17.0 | fixed |
| 0000394 | Data import | minor | Can not import stand with both nature conservation and overstorey layer | 2.17.0 | fixed |
| 0000379 | TPG | minor | TPG can sometimes save multiple identical programs | 2.16.5 | fixed |
| 0000373 | Report generator | minor | Report conditions are not applied when grouping on forest domain and showing the results in the same report | 2.16.4 | fixed |
| 0000375 | Data import | minor | SiteIndex = 0 accepted although data should be used for tree simulation | 2.16.4 | fixed |
| 0000378 | Data import | minor | Unable to import stand registers when splitting NC areas and have left an AreaLevel field empty. | 2.16.4 | fixed |
| 0000358 | General | minor | Det går inte att visa userdefined under Initial State - Details | 2.16.1 | fixed |
| 0000350 | Data import | minor | Incorrect row number indicated when there is an error during stand register import | 2.16.0 | fixed |
| 0000330 | Optimization | minor | Exception when viewing DiameterClassCuttingData results without Treatment column | 2.16.0 | fixed |
| 0000334 | Other | minor | Long standid-names are not displayed in window Optimization Result Details | 2.16.0 | fixed |
| 0000337 | Optimization | minor | Saving an optimization model with Opening Size constraints will corrupt the model | 2.16.0 | fixed |
| 0000338 | Other | minor | Interfacet för optimering, textrutor för små, text syns inte. | 2.16.0 | fixed |
| 0000347 | Data import | minor | Unable to import stand register where AreaLevel2 is empty. | 2.16.0 | fixed |
| 0000349 | Report generator | minor | Results from HabitatModels can not be shown in reports until project restart | 2.16.0 | fixed |
| 0000321 | Project handling | minor | PlanWise tries to deserialize non-existing ConditionalControlTables | 2.15.4 | fixed |
| 0000325 | Data import | minor | Can not import a stand with overstorey layer and split both layers into its own NC stand | 2.15.4 | fixed |
| 0000319 | General | minor | Diameter Class Cutting Data shows duplicate values for all treatments in a period | 2.15.2 | fixed |
| 0000307 | Other | minor | When trying to remove a subnode analysis area, the entire area is removed | 2.15.1 | fixed |
| 0000316 | Report generator | minor | Report viewer shows no data for old simulations when 'Productive Area' is selected | 2.15.1 | fixed |
| 0000301 | Forest Domain Builder | minor | Two forest domains should not be allowed to be selected at the same time | 2.15.0 | fixed |
| 0000303 | Control categories | minor | Cloning production model control table doesn't clone Sapling Damage Factors | 2.15.0 | fixed |
| 0000312 | TPG | minor | Exception in Conditional Control Tables dialog | 2.15.0 | fixed |
| 0000278 | Optimization | minor | Optimization list won't update after a new optimization was saved | 2.14.0 | fixed |
| 0000291 | HeurekaAPI | minor | Volume and mean age per species differ from those entered in the Heureka API | 2.14.0 | fixed |
| 0000292 | Optimization | minor | Duplicate optimizations after performing Habitat model calculation | 2.14.0 | fixed |
| 0000293 | Optimization | minor | Habitat models display no name if no Display name is set | 2.14.0 | fixed |
| 0000267 | TPG | minor | "Object reference" fel i TPG | 2.13.0 | fixed |
| 0000276 | Data import | minor | Can not simulate initial state for stands where Inventory year is lower than other historic treatments | 2.13.0 | fixed |
| 0000259 | General | minor | Pasting values into timber pricelist puts 0 in last column | 2.13.0 | fixed |
| 0000268 | TPG | minor | Generation in Result is always 0 | 2.13.0 | fixed |
| 0000269 | TPG | minor | B3-plots are not regenerated when final felling in period 0 | 2.13.0 | fixed |
| 0000244 | TPG | minor | No stump harvest when changing control category between generations | 2.13.0 | fixed |
| 0000258 | General | minor | Trees in StandWise remain selected for treatment after deselection if "stepping back in time"? | 2.13.0 | fixed |
| 0000241 | Project handling | minor | Cannot change selected ingrowth species | 2.12.3 | fixed |
| 0000064 | Optimization | minor | Error when adding StandObjectData.PropContorta etc to optimization model | 2.12.3 | fixed |
| 0000243 | TPG | minor | Takes verý long time to cancel TPG simulation | 2.12.3 | fixed |
| 0000248 | Optimization | minor | If objective function label is not "ObjFunc", then objective function value is not saved with optimization result | 2.12.3 | fixed |
| 0000235 | Optimization | minor | Can not save CSV in optimization results column view | 2.12.2 | fixed |
| 0000236 | Project handling | minor | When selecting entire areas, initial state will be calculated multiple times | 2.12.2 | fixed |
| 0000221 | Project handling | minor | Random seeds in too many different locations | 2.12.0 | fixed |
| 0000223 | Control categories | minor | ManagementSystem result sometimes lacks value | 2.12.0 | fixed |
| 0000224 | Other | minor | Pricelist name changes are not saved | 2.12.0 | fixed |
| 0000232 | General | minor | Path in Path Settings not used for some features | 2.12.0 | fixed |
| 0000215 | Other | minor | Rerun simulations doesn't calculate alternatives for unmanaged treatment units | 2.12.0 | fixed |
| 0000233 | Other | minor | Program crashes if user lacks write permission on custom Common directory | 2.12.0 | fixed |
| 0000216 | RegWise simulation | minor | "Show simulation report" that displays simulation settings is not available in RegWise | 2.12.0 | fixed |
| 0000226 | Control categories | minor | Reference error when loading multiple control tables of the same type from file | 2.12.0 | fixed |
| 0000228 | Forest Domain Builder | minor | Trying to cancel deletion of control category seemingly fails | 2.12.0 | fixed |
| 0000219 | Project handling | minor | Loading previous databases locks the GUI | 2.12.0 | fixed |
| 0000229 | Other | minor | Zips fails to be extracted | 2.12.0 | fixed |
| 0000214 | TPG | minor | Enforced thinning sometimes applied even if a valid thinning period is found | 2.11.1 | fixed |
| 0000212 | TPG | minor | Thinning Period Delay Generation 2 only applied from generation 3 onward | 2.11.1 | fixed |
| 0000192 | Visualisation StandWise | minor | Adding a DEM (Digitial Elevation Model) in StandWise results in an index error. | 2.11.0 | fixed |
| 0000204 | Data import | minor | User should be notified when column names are wrong in tree list import files | 2.11.0 | fixed |
| 0000198 | TPG | minor | Initial bare land is not regenerated when rerunning a simulation when using NFI-data plots as input data | 2.11.0 | fixed |
| 0000206 | TPG | minor | Rerun of simulations for unmanaged stands ignored period midth | 2.11.0 | fixed |
| 0000207 | TPG | minor | Print tree list during rerun of simulation crashes the program for large simulations | 2.11.0 | fixed |
| 0000189 | General | minor | Price trend handler may start unnecessary recalculation | 2.11.0 | fixed |
| 0000201 | Other | minor | Error when saving and loading default result variables in result variable selection dialog | 2.11.0 | fixed |
| 0000210 | Other | minor | StandWise hangs when selecting properties | 2.11.0 | fixed |
| 0000202 | Control categories | minor | No pricelists selected after adding cost control table from file | 2.11.0 | fixed |
| 0000191 | Map | minor | Error "Invald column name..." when saving shapefile | 2.11.0 | fixed |
| 0000203 | Control categories | minor | Control table file name should be added so user can separate different versions | 2.11.0 | fixed |
| 0000184 | Other | minor | Initial State details table view empty after clicking Update-button when using FMPP-data | 2.10.0 | fixed |
| 0000177 | General | minor | Exception after removing forest area in StandWise | 2.10.0 | fixed |
| 0000168 | Map | minor | Map info-window shows stand age instead of mean diameter | 2.10.0 | fixed |
| 0000171 | Project handling | minor | Error when applying project template | 2.10.0 | fixed |
| 0000180 | Project handling | minor | Cannot load imported StandWise project if the database is not found | 2.10.0 | fixed |
| 0000100 | Optimization | minor | LP_Solve cannot be aborted | 2.10.0 | fixed |
| 0000172 | Map | minor | Error when adding WMTS map service | 2.10.0 | fixed |
| 0000173 | Map | minor | Added WMTS-map service not saved | 2.10.0 | fixed |
| 0000182 | Forest Domain Builder | minor | LandUse conditions in forest domain results in exception | 2.10.0 | fixed |
| 0000164 | Map plugins | minor | Must hit "Cancel" three times to cancel adding of web map | 2.10.0 | fixed |
| 0000174 | Optimization | minor | An optimization model item that is excluded should trigger a warning if it is included in an active definition | 2.10.0 | fixed |
| 0000183 | TPG | minor | No tree retention when performing selection felling as a treatment proposal | 2.10.0 | fixed |
| 0000175 | Optimization | minor | Induced optimization model invalidity not notified | 2.10.0 | fixed |
| 0000085 | Map | minor | Wrong map | fixed | |
| 0000040 | Optimization | minor | Ohanterat fel vid kompilering av stora optimeringsproblem | fixed | |
| 0000086 | RegWise simulation | minor | Control table parameter copied as reference instead of cloned | fixed | |
| 0000658 | General | minor | Forest domains are ignored in tactical TPG | fixed | |
| 0000089 | RegWise simulation | minor | Add Tooltip "No area selected" to Simulate button | fixed | |
| 0000129 | PlanEval | minor | Wrong labels in PlanEvalWeb | fixed | |
| 0000043 | Visualisation StandWise | minor | "Index outside range..." when opening stand with trees with coordinates | fixed | |
| 0000080 | RegWise simulation | minor | Intensive fertilization not applied when expected | fixed | |
| 0000119 | Optimization | minor | Habitat data not available for view in map until optimization has been re-loaded | fixed | |
| 0000036 | Map | minor | Map do not show when restarting project | fixed | |
| 0000200 | General | minor | PropertyGrid for general pricelist setting misses functionality in other Heureka propertygrid | fixed | |
| 0000417 | General | minor | User Submitted Report - Ingående tillstånd Rikstaxdata | fixed | |
| 0000562 | General | minor | Feature: Add birch as category to deadwood results | fixed | |
| 0000702 | TPG | minor | NPV:s not always calculated correctly in tactical TPG | fixed | |
| 0000190 | Other | minor | List all local SQL instances | fixed | |
| 0000074 | Other | minor | Plot reported as UnevenAged altought it is EvenAged | fixed | |
| 0000047 | Growth / production | minor | Breeding has effect only one period in RegWise | fixed | |
| 0000653 | TPG | minor | Forest domains settings ignored in tactical TPG | fixed | |
| 0000039 | General | minor | Projektet inte stängt trots att det verkar så | fixed | |
| 0000048 | Map | minor | Program is asking to convert from Sweref99 to Sweref99 | fixed | |
| 0000015 | TPG | minor | Memory problem when running TPG on large datasets | fixed | |
| 0000024 | Growth / production | minor | Mortality per Diameter Class not viewable | fixed | |
| 0000655 | General | tweak | Mean "Bonitet" displayed in initial state is incorrectly labeled as m3sk/ha | 2.23.0 | fixed |
| 0000633 | General | tweak | Default regeneration settings in StandWise dialogs differs from control table settings | 2.22.0 | fixed |
| 0000608 | Project handling | tweak | Removing keyboard shortcut for deleting projects | 2.22.0 | fixed |
| 0000593 | Optimization | tweak | Change: Removed ObjFunc from new models | 2.21.2 | fixed |
| 0000591 | Data import | tweak | Change: Let users import stand register with EvenAgeCode 0 | 2.21.1 | fixed |
| 0000523 | Other | tweak | Change the naming of function Compute Adjacencies | 2.19.1 | fixed |
| 0000547 | Optimization | tweak | Change the naming of habitat model tools | 2.19.1 | fixed |
| 0000537 | General | tweak | Bark thickness model unnecessary memory allocations | 2.19.0 | fixed |
| 0000528 | General | tweak | Parallelization optimization | 2.19.0 | fixed |
| 0000272 | Optimization | tweak | Optimization result and solver meta data mixed in the same output window | 2.13.0 | fixed |
| 0000213 | TPG | tweak | Treatment program generator tests alternatives with invalid thinning periods | 2.11.1 | fixed |
| 0000188 | Other | tweak | Clone and Split NC Area menu item can be selected without a project loaded | 2.10.2 | fixed |
| 0000126 | PlanEval | tweak | Root url used instead of actual application url in PlanEvalWeb | fixed | |
| 0000133 | General | text | Result variable AlternativeSummaryData.SoilExpectationValue has no unit label | 2.9.0 | fixed |
| 0000156 | Report generator | trivial | Improve design of histograms in StandWise | 2.9.3 | fixed |
| 0000144 | PlanEval | trivial | Fix confusing UI when configuring value in PlanEval | 2.9.0 | fixed |
| 0000148 | PlanEval | trivial | Links to SHa:s homepage from About-form in PlanEvalWeb are broken | 2.9.0 | fixed |
| 0000769 | Control categories | trivial | Control Category item 'Treatment Timing - Tactical planning >> Includate unmanaged' is decprecated | 2.23.1 | fixed |
| 0000698 | Data import | trivial | Add management class K | 2.23.0 | fixed |
| 0000672 | Map | trivial | Heureka cannot import point geometries. | 2.23.0 | fixed |
| 0000684 | TPG | trivial | Very small differences in financial values between TPG and Rerun Simulation | 2.23.0 | fixed |
| 0000637 | General | trivial | StandWise project fails to load due to diagram deserialization error | 2.22.0 | fixed |
| 0000605 | General | trivial | Total volume in initial state labeled as m3sk/ha | 2.22.0 | fixed |
| 0000614 | TPG | trivial | Results variables are assigned the wrong category in TPG results-view | 2.22.0 | fixed |
| 0000607 | Data import | trivial | Fel vid simulering av trädlista för bestånd när slutet på ungskogsfas | 2.22.0 | fixed |
| 0000595 | General | trivial | Dead wood: Decay class change when decomposition rate set to zero | 2.21.2 | fixed |
| 0000586 | Data import | trivial | Checkbox not anchored | 2.21.1 | fixed |
| 0000590 | General | trivial | EvenAgeData calculated to "Unknown" | 2.21.1 | fixed |
| 0000566 | Map plugins | trivial | Buffer Dialog returns error in some cases | 2.21.0 | fixed |
| 0000561 | Data import | trivial | Fel rubrik på fråga "create units for retention patches" vid import av beståndsregister direkt vid skapandet av ett nytt projekt | 2.21.0 | fixed |
| 0000505 | TPG | trivial | Results Types column sort is inconsistent | 2.19.0 | fixed |
| 0000313 | TPG | trivial | Place cursor on new row if "Add New" has been clicked in Conditional Control Tables | 2.15.0 | fixed |
| 0000254 | Control categories | trivial | "RetentionTime in Nature conservation was moved.." message is displayed although project has been updated | 2.13.0 | fixed |
| 0000263 | Optimization | trivial | Optimization model syntax-highlight does not work if blank space is missing | 2.13.0 | fixed |
| 0000230 | Optimization | trivial | MissingValueSubstitute is redundant in optimization model | 2.12.0 | fixed |
| 0000231 | Project handling | trivial | Opening the database name combo box closes it immediatelly | 2.12.0 | fixed |
| 0000135 | Data import | trivial | Användarspecificerade namn på UserDefinedVariable1-10 | 2.10.0 | fixed |
| 0000155 | Report generator | feature | Add height class diagram type to StandWise | 2.9.3 | fixed |
| 0000127 | PlanEval | feature | Add "Forgot password" function to PlanEvalWeb | 2.9.0 | fixed |
| 0000062 | Data import | feature | Spara filnamn importerat beståndsregister | 2.9.0 | fixed |
| 0000147 | Report generator | feature | Optimization Results > Details > Select Results sparas inte för projektet | 2.9.0 | fixed |
| 0000138 | PlanEval | feature | Contact page | 2.9.0 | fixed |
| 0000131 | Help documentation | feature | Documentation for installing and using PlanEvalWeb | 2.8.1 | fixed |
| 0000099 | Optimization | feature | Do not remove the possibility to solve an already built optimization problem | 2.7.0 | fixed |
| 0000004 | Report generator | feature | Feature request: Contex-menu for changing type of opened chart in StandWise | 2.5.1 | fixed |
| 0000021 | General | feature | Add Management System as result variable | 2.5.0 | fixed |
| 0000011 | General | feature | Tillåt Regeneration Species som föryngringsträdslag | 2.4.0 | fixed |
| 0000763 | General | feature | Create TPG result variables that sums up the pulpwood value for conifers and broadleaves, repectively | 2.23.1 | fixed |
| 0000774 | RegWise simulation | feature | Feature: Provide an option to limit the area of planted contorta within a domain | 2.23.1 | fixed |
| 0000749 | General | feature | Add initial state diagrams for distributions over Management Classes | 2.23.1 | fixed |
| 0000660 | General | feature | Add buttons to Select Variables-view | 2.23.1 | fixed |
| 0000767 | Other | feature | Feature: Price correction per m3 | 2.23.1 | fixed |
| 0000727 | Optimization | feature | Feature: Add support for Gurobi 12.0 | 2.23.1 | fixed |
| 0000768 | General | feature | Feature: User defined settings for tree retention | 2.23.1 | fixed |
| 0000753 | Control categories | feature | Add search function for pricelist and result variable settings, and improve existing search function for control tables | 2.23.1 | fixed |
| 0000719 | General | feature | Display issues in current version on start page | 2.23.1 | fixed |
| 0000791 | General | feature | Add existing SiteData data to user accesible result variables: 'Coordinates', 'Slope', 'SlopeDirection' | 2.23.1 | fixed |
| 0000756 | Project handling | feature | Issue with how NewProjectWizard loads recent database connections | 2.23.1 | fixed |
| 0000721 | Report generator | feature | Add the option of customizing the number of decimals for each variable in the report templates | 2.23.1 | fixed |
| 0000718 | General | feature | Added filtration by forest domains in TPG result | 2.23.0.1 | fixed |
| 0000717 | Data import | feature | Improvements/changes to correction factor calculations | 2.23.0 | fixed |
| 0000674 | Forest Domain Builder | feature | Add "Contains" and "BeginsWith" conditionals in domain builder | 2.23.0 | fixed |
| 0000678 | Control categories | feature | Add a control category's number as a browsable property | 2.23.0 | fixed |
| 0000632 | Control categories | feature | SkipNthPrioritizedTreatmentUnit -> ProbabilitySkipPrioritizedTreatmentUnit | 2.22.0 | fixed |
| 0000650 | General | feature | Faster loading of large forest databases | 2.22.0 | fixed |
| 0000613 | Project handling | feature | Renaming of projects | 2.22.0 | fixed |
| 0000609 | Optimization | feature | Support for CPLEX 22.1.1 | 2.22.0 | fixed |
| 0000654 | Optimization | feature | Support for Gurobi 11.0 | 2.22.0 | fixed |
| 0000568 | Control categories | feature | Feature: Add settings for Harvested Wood Products | 2.21.0 | fixed |
| 0000552 | Optimization | feature | Feature: Add support for Cplex and CoinOr | 2.20.0 | fixed |
| 0000553 | Optimization | feature | Feature: Add support for Gurobi 10.0 | 2.20.0 | fixed |
| 0000517 | General | feature | Garbage collection change | 2.19.0 | fixed |
| 0000536 | RegWise simulation | feature | Show TreatmentUnitExternalData in initial state and simulation results | 2.19.0 | fixed |
| 0000520 | Optimization | feature | Remove final felling requirement from cluster parameters | 2.19.0 | fixed |
| 0000539 | Optimization | feature | Feature: Add support for Gurobi 9.5 | 2.19.0 | fixed |
| 0000521 | Optimization | feature | Add OptimizationGuid to Optimization info | 2.19.0 | fixed |
| 0000522 | General | feature | Add information regarding which random seed was used | 2.19.0 | fixed |
| 0000514 | General | feature | New result variables: Volume Harvested | 2.19.0 | fixed |
| 0000503 | Data import | feature | New feature: Import data from harvester simulator | 2.19.0 | fixed |
| 0000496 | Report generator | feature | Homogenisera rapportmallarna vad gäller överståndare. | 2.18.3 | fixed |
| 0000498 | Report generator | feature | Beräkning av kolpoolsförändringar i skogsprodukter (Harvested Wood Products (HWP)) i Heureka | 2.18.3 | fixed |
| 0000492 | TPG | feature | Feature request: Select multiple domains to display in Initial state | 2.18.3 | fixed |
| 0000443 | Growth / production | feature | New option to leave high stumps when thinning | 2.17.6 | fixed |
| 0000444 | Growth / production | feature | Additionally decomposited dead wood is now moved to the litter pool | 2.17.6 | fixed |
| 0000413 | Optimization | feature | Add link to Gurobi 9.1 | 2.17.2 | fixed |
| 0000391 | Other | feature | Bug reporting from error dialogs. | 2.17.0 | fixed |
| 0000359 | Other | feature | Habitatmodellerna fungerar inte | 2.17.0 | fixed |
| 0000365 | TPG | feature | Result variable AlternativeSummary.ManagementSystem set to Unmanaged instead of CCF in managed NC-area | 2.16.5 | fixed |
| 0000380 | General | feature | Test report internal activity | 2.16.4 | fixed |
| 0000376 | Data import | feature | Importing a stand register of a sapling plot that calculates the height to be > 7m causes the import to halt | 2.16.4 | fixed |
| 0000369 | General | feature | Verify that high stumps do not end up in the soil model. | 2.16.4 | fixed |
| 0000371 | Data import | feature | Jag kan inte importera NC area som egna bestånd | 2.16.4 | fixed |
| 0000370 | Other | feature | Certain result variables are not available | 2.16.2 | fixed |
| 0000332 | Other | feature | Custom user defined column names should be displayed if applicable, instead of generic "UserDefined" | 2.16.0 | fixed |
| 0000343 | Report generator | feature | Arithmetic expressions for report conditions | 2.16.0 | fixed |
| 0000280 | TPG | feature | Setting Min Final Felling Period to a large number causes an exception in TPG | 2.16.0 | fixed |
| 0000326 | Data import | feature | Stand register importer crashes when importing file with old import format | 2.15.4 | fixed |
| 0000327 | Optimization | feature | Can not run Optimization on new tactical simulations | 2.15.4 | fixed |
| 0000320 | Control categories | feature | Control table selection is lost when changing tabs | 2.15.3 | fixed |
| 0000317 | Visualisation StandWise | feature | DirectX11 renderer for StandWise | 2.15.1 | fixed |
| 0000314 | Forest Domain Builder | feature | Cannot re-add control table in Conditional Control Tables dialog | 2.15.0 | fixed |
| 0000297 | Other | feature | Updating optimization result list | 2.15.0 | fixed |
| 0000265 | Data import | feature | Use date instead of inventory year | 2.14.0 | fixed |
| 0000284 | Other | feature | Add result variable for sum of dead wood | 2.14.0 | fixed |
| 0000286 | Optimization | feature | Allow user to set the location of temporary optimization files | 2.14.0 | fixed |
| 0000261 | TPG | feature | Duplicate programs may be generated in PlanWise if treatment criteria are not met | 2.14.0 | fixed |
| 0000282 | General | feature | New default pricelists require recalculation | 2.14.0 | fixed |
| 0000275 | Project handling | feature | Remove prompt asking about where to save pricelist, when it's not needed | 2.13.0 | fixed |
| 0000277 | Other | feature | Plugins can now have custom settings | 2.13.0 | fixed |
| 0000262 | Optimization | feature | Allow copying of parameter of constant or formula type in optimization model | 2.13.0 | fixed |
| 0000264 | General | feature | Improve threading performance when calculating pricelists | 2.13.0 | fixed |
| 0000220 | Optimization | feature | Incorrect solver finished message for some solvers | 2.12.0 | fixed |
| 0000197 | Growth / production | feature | Skip pricelist for biofuel thinning and assume all felled trees are bio fuel | 2.11.0 | fixed |
| 0000199 | Optimization | feature | Spara del av optimeringsmodell | 2.11.0 | fixed |
| 0000208 | TPG | feature | Add a button that allows the user to select species of trees to print to log | 2.11.0 | fixed |
| 0000178 | Optimization | feature | Save optimization result metadata | 2.10.2 | fixed |
| 0000176 | Optimization | feature | Add solver status to message after solving model | 2.10.0 | fixed |
| 0000169 | Optimization | feature | Add support for Gurobi 7.5 and Mosek 8.1 | 2.10.0 | fixed |
| 0000179 | Other | feature | Restart application | 2.10.0 | fixed |
| 0000161 | Map | feature | Save map settings between sessions | 2.10.0 | fixed |
| 0000157 | Report generator | feature | Enable copy of charts from StandWise to Excel | 2.10.0 | fixed |
| 0000095 | Other | feature | Sorting TPG-results by clicking on NetPresentValue column header does not work as expected | fixed | |
| 0000364 | Control categories | feature | Movable control categories | fixed | |
| 0000367 | General | feature | Soil model: Performance impact of many tree species groups. | fixed | |
| 0000196 | Optimization | feature | Add possibility to create zimpl data files but skip running ZIMPL | fixed | |
| 0000054 | Data import | feature | RegenerationSpecies/Auto as alternative treatment proposal regeneration species | fixed | |
| 0000368 | General | feature | Is the implementation of soil and Q models according to the latest versions of the documents? | fixed | |
| 0000023 | Report generator | feature | Or-condition in Report-level condition? | fixed | |
| 0000339 | Other | feature | Document database structure and basic SQL for users | fixed | |
| 0000274 | TPG | feature | Conditional price lists and cost tables. | fixed |