Difference between revisions of "ControlTable Dead wood"
Line 2: | Line 2: | ||
[[Category:Reference Manual]] | [[Category:Reference Manual]] | ||
[[Category:Dead Wood]] | [[Category:Dead Wood]] | ||
− | |||
In the dead wood control table you can configure the simulations of dead wood development, from the time of a single trees' death to complete decomposition. | In the dead wood control table you can configure the simulations of dead wood development, from the time of a single trees' death to complete decomposition. | ||
− | |||
== Dead Wood == | == Dead Wood == | ||
Allows you to control how the decomposition, and if any extraction of dead wood (sometimes used as forest fuel), should be simulated. | Allows you to control how the decomposition, and if any extraction of dead wood (sometimes used as forest fuel), should be simulated. |
Revision as of 17:18, 18 March 2016
In the dead wood control table you can configure the simulations of dead wood development, from the time of a single trees' death to complete decomposition.
Dead Wood
Allows you to control how the decomposition, and if any extraction of dead wood (sometimes used as forest fuel), should be simulated.
Decomposition Rate Biomass
Annual biomass decomposition rate per species (percentage per year)
Decomposition Rate Volume
Annual volume decomposition rate per species (percentage per year)
Min Density
Decayed dead wood with less density than this will be ignored and "leaves" the system
Proportion Dead Wood Collected
Proportion of the newly died tries (i.e. of the calculated mortality) that is removed from the forest by people to use for example for household fuelwood. Percentage per species.
Intial dead Wood
Initial Dead Wood
Source for initial dead wood:
- Database: Initial dead wood will be primarily read from inventoried dead wood, secondarily standregister is read for data on dead wood.
- Simulation: Initial dead wood is simulated at according to setting for simulation level.
- None: No initial dead wood will be considered, even if inventory data for dead wood is avaliable.
Simulation Level
Amount of initial dead wood to simulate if Initial Dead Wood = Simulation.
- Low = 2.15 m3/ha,
- Medium = 4.3 m3/ha,
- High = 8.6 m3/ha
Last Decay Class Inventoried
If for example only decay classes 0-2 has been inventoried, set to 2 = Slightly decomposed. This will have the effect that if the decay class has not been registered for a dead tree, the dead wood volume of the tree will only be distributed to the classes inventoried, see Dead wood decay class distribution.
Simulate for Remaining Classes
Set to True if dead wood has been inventoried only for example for class 0-2, and you want to simulated occurence of dead wood for the remaning classes. The amount is determined by the same settings as used when letting the program simulate the initial occurrence of dead wood. This means that, for example, volumes are added to class 3 and 4 to constitute 23 % and 27 %, respectively, of the total dead wood volume.
Simulation Level For Remaining Classes
(Display only if Simulate for Remaining Classes is set to True) Amount of initial dead wood to use as baseline for classes not inventoried. See Simulation levels above
Dead wood decompostion due to final felling
Enable decomposition due to final felling
If set to True, increased decomposition of dead wood in the clear cut stand and in retention patches that belong to the stand, can be simulated. When set to True, parameters "Decomp. ..." below are displayed.
Decomp. Final Felling No Soil Preparation
Amount of additional decomposition of dead wood when final felling is performed on clear cut areas without soil preparation
Decomp. Final Felling Soil Preparation
Amount of additional decomposition of dead wood when final felling is performed on clear cut areas with soil preparation
Decomp. Set-Asides No Soil Preparation
Amount of additional decomposition of dead wood when final felling is performed on set-aside areas without soil preparation
Decomp. Set-Asides Soil Preparation
Amount of additional decomposition of dead wood when final felling is performed on set-aside areas with soil preparation